Plastic lattice trim saw sheath

Discussions about other types of tools, logging history, trail maintenance, etc.
MNSHIELD
PostsCOLON 40
JoinedCOLON December 1st, 2017, 6:14 am

Plastic lattice trim saw sheath

Post by MNSHIELD » January 22nd, 2023, 7:35 am

I wanted to share my version of the lattice sheath that I think Dolly first shared. These work great for trail work, and transport well in a vehicle or canoe. One of the challenges is keeping them user friendly, quick, secure, and free from metal fasteners protruding into the slot with the teeth and rakers. This version takes care of all those issues.

The shock cord bungy that came pre-assembled from www.oldscoutoutdoorproducts.com. The Lattice, rivets, and velcro from Lowes Big box store.

Rivets - aluminum 3/16 hole / 1/8" reach/depth
Velcro - 1.5" ( length long enough to wrap around the saw and overlap on to itself)

I placed the 1/8" holes for the shock cord 4.5" from each end. The seam from the molding process of the lattice worked well as the on center mark to drill the 1/8' hole. I disassembled the shock cord and discarded the extra plastic tube and reused the rest.

I placed the velcro on center of the lattice, and doubled the velcro over and used two rivets to secure it to the sheath.

MNSHIELD
Attachments
20230122_095932.jpg
20230122_095955.jpg
20230122_100006.jpg
20230122_095455.jpg
20230122_095646.jpg

MNSHIELD
PostsCOLON 40
JoinedCOLON December 1st, 2017, 6:14 am

Re: Plastic lattice trim saw sheath

Post by MNSHIELD » January 22nd, 2023, 7:38 am

Additional Pics
Attachments
20230122_094942.jpg
20230122_095225.jpg
20230122_100054.jpg
20230122_100106.jpg

User avatar
PATCsawyer
PostsCOLON 734
JoinedCOLON February 19th, 2011, 5:27 am
LocationCOLON Northern Michigan

Re: Plastic lattice trim saw sheath

Post by PATCsawyer » January 23rd, 2023, 5:02 am

Always looking for a better way to make these guards. The only fail I've ever had with one was on the center strap. That's the point of maximum flex and it cracked in-line with a small hole I'd drilled. It was also a very cold day. Never had any trouble with the end attachments no matter how I drilled, glued, or screwed the straps, as the lattice lies mostly flat at those points.

BUTTON_POST_REPLY