Handles for Atkins #4 hammer

A forum about crosscut saw filing
Starling_Saw
PostsCOLON 211
JoinedCOLON February 19th, 2011, 9:02 am
LocationCOLON Southwest Washington State

Re: Handles for Atkins #4 hammer

Post by Starling_Saw » March 8th, 2017, 9:02 pm

Jim_Thode wroteCOLON
dayle1960 wroteCOLONSwage bars? Good grief, something else for me to dive into. Got an explanation on what a bar is used for, since I am so dense and lazy to research it myself. Honestly, this is the first time I've seen one and I ain't got a clue what it's purpose might be.
Disston says that the swage bar is for use on circular and gang saws. I guess that you could use it on a crosscut saw for swaging too. Some filers use a bar rather then hammering directly on the raker tooth.

Maybe John can say exactly how he would use it.
Disston Saw tools 2a.jpg
Jim
I've used them on crosscut saw Rakers, like you would use an anvil for cutters. because they are tapered, you slide the bar into the gullet and use the adjoining cutter tooth as part of a backstop for the bar. The round part of the bar will help you from making a sharp bend under the Raker tooth. They are also used to swage the tooth of circle and band saw teeth also, except the tooth is hammered so as the tooth will be wider than the saw plate. different size bars for different size gullets.
John

dayle1960
PostsCOLON 124
JoinedCOLON July 31st, 2014, 11:33 am
LocationCOLON Bella Vista Arkansas

Re: Handles for Atkins #4 hammer

Post by dayle1960 » March 9th, 2017, 5:35 am

Is the bar smoothed tapered or sharpedged and stepped?

Starling_Saw
PostsCOLON 211
JoinedCOLON February 19th, 2011, 9:02 am
LocationCOLON Southwest Washington State

Re: Handles for Atkins #4 hammer

Post by Starling_Saw » March 10th, 2017, 12:12 pm

These two bars have six facets. Where the seventh and eighth would be, it is round. Overall they are tapered.

underbucker
PostsCOLON 21
JoinedCOLON November 8th, 2011, 9:19 am
LocationCOLON Oregon

Re: Handles for Atkins #4 hammer

Post by underbucker » March 17th, 2017, 3:41 pm

First two prototypes of Dolly's modifications to Atkins #4 setting swaging hammer completed. Dolly is testing one, I am working with the second in my shop.
DSC05167 LR.jpg

MangoBoy
PostsCOLON 4
JoinedCOLON February 22nd, 2019, 1:12 pm

Re: Handles for Atkins #4 hammer

Post by MangoBoy » August 1st, 2019, 10:09 am

What do the Dolly-style hammer heads weigh ?

Are there any Dolly-style hammers for sale ?

sandersdwa
PostsCOLON 48
JoinedCOLON January 11th, 2015, 6:53 pm

Re: Handles for Atkins #4 hammer

Post by sandersdwa » August 2nd, 2019, 5:35 am

Contact droe@pcta.org to request a Dolly hammer.

BUTTON_POST_REPLY