Hard lesson on fractured teeth. Simonds No. 13

A forum about crosscut saw filing
User avatar
Jim_Thode
PostsCOLON 782
JoinedCOLON June 28th, 2012, 9:34 am
LocationCOLON Onalaska, Washington State, USA
CONTACTCOLON

Re: Hard lesson on fractured teeth. Simonds No. 13

Post by Jim_Thode » March 11th, 2022, 12:06 am

Colorado Joe,

For the hammer on flat anvil set method to work the saw has to be held firmly on the anvil, If you do not you will likely break the tooth.
Image

For the missing, it relatively easy for anyone with a welder to weld replacement teeth on.
https://pbase.com/jimthode/tooth_weld

Colorado Joe
PostsCOLON 7
JoinedCOLON January 11th, 2022, 7:06 am

Re: Hard lesson on fractured teeth. Simonds No. 13

Post by Colorado Joe » March 12th, 2022, 6:25 am

Thanks for the extra tips. I was in my garage and kept the lighting pretty minimal. Never thought about heat from the opposite side that I am looking at, nugget of knowledge retained.

BUTTON_POST_REPLY