Strange face on a saw hammer.

Got a question? New to the forum? Feel free to post your questions here.

Strange face on a saw hammer.

Postby Sawman » August 25th, 2018, 12:15 pm

Got these today after a long wait for the price to come down.
DSCF0892 3.jpg
The question is why does one of them have a ridge on it.
DSCF0897 2.jpg
It is on both faces and it appears to been made that way not someone messing about its just to well done. Any ideas.
DSCF0899.jpg
DSCF0900 2.jpg
Sawman
 
Posts: 169
Joined: October 1st, 2013, 12:57 pm
Location: York. U.K

Re: Strange face on a saw hammer.

Postby King Karri Tree » September 11th, 2018, 5:05 am

It looks like a rock hammer??

Only a guess though.
King Karri Tree
 
Posts: 25
Joined: November 15th, 2015, 5:41 am
Location: South West of Western Australia

Re: Strange face on a saw hammer.

Postby Gavin Longrain » November 1st, 2018, 1:10 am

A sawsmith showed me similar hammer which he called a 'peck' hammer'. He used this to hit a hollowed area to raise it i.e. he did not have to turn the saw over. It did not quite make sense to me, but I saw him use it and it worked. You could try it on scrap metal and find out.
Gavin Longrain
 
Posts: 653
Joined: May 17th, 2012, 10:51 am
Location: Dalbeattie, near Dumfries, Scotland

Re: Strange face on a saw hammer.

Postby Jim_Thode » November 1st, 2018, 10:33 am

This is what John Starling wrote about the funny faced hammer:
The hammer on the far right, I found after a lengthy discussion with other saw filers, This hammer is called a hatchet head. It was used in tensioning Black saws and Sash gangs. Black saws are saw plate that have just been forged and they need to be broke down and tensioned, with this hammer. Then they are ground after, to remove any marks and inclusions in the surface of the saw plate. They are also used to straighten chipper and planer knives, when first made and the plate is then ground flat.
User avatar
Jim_Thode
 
Posts: 713
Joined: June 28th, 2012, 9:34 am
Location: Onalaska, Washington State, USA


Return to Crosscut saws 101

Who is online

Users browsing this forum: Bing [Bot] and 2 guests

cron