5' lance and raker bucking saw

Post here if you are trying to identify a saw, or want to discuss specific features of saws that can be used for identification.

5' lance and raker bucking saw

Postby soli » November 28th, 2018, 10:11 pm

Hoping again to get some help ID'ing the one on the left:

crosscut-ground-1a.jpg


No etching is visible
Length is a couple sixteenths over 60"
One end has an extra lance tooth partial width.
Crescent ground
End width is 2.75"+ to the end gullet
Middle width is 4.75" to the middle gullet
soli
 
Posts: 147
Joined: January 24th, 2013, 9:25 pm

Re: 5' lance and raker bucking saw

Postby Jim_Thode » November 28th, 2018, 10:44 pm

Looks like I can see a notch on the back of the 5' saw near the end. That and the closer spacing of the teeth would indicate that it is a Simonds #520. They are very nice saws and around here the most popular 5' saw in the day.

Image

Jim
User avatar
Jim_Thode
 
Posts: 716
Joined: June 28th, 2012, 9:34 am
Location: Onalaska, Washington State, USA

Re: 5' lance and raker bucking saw

Postby soli » November 28th, 2018, 10:57 pm

Thanks Jim. Yes, here is a closer look:

5ft-crosscut-ground-2a.jpg
soli
 
Posts: 147
Joined: January 24th, 2013, 9:25 pm


Return to Saw ID

Who is online

Users browsing this forum: No registered users and 3 guests

cron